VOLTE VOIP IMS SIP CSFB

Often people are confused between VOLTE ,VOIP, IMS , SIP and CSFB.
To be clear between all this item lets explain them and understand one by one.
We will start with CSFB and then VOIP and then VOLTE and IMS.

CSFB - CSFB is CS Fall back.
             This was introduced at the very early stages of 4G/LTE to make CALL's as because LTE has
              been PS from the beginning and over PS LTE was not having any standard offerings for
              calls. Because of not having call support 3GPP standard decides to use to use CS over
              legacy network.
VOIP - Now VOIP is Voice Over IP. Frankly speaking there is no relation between VOIP and LTE.
             VOIP can be used over PS and it could be from 2G , 3G or LTE or may be Wi-Fi even over
             the LAN as well.
VOLTE - VOLTE is Voice Over LTE. The much talked feature of LTE without which LTE was not
                complete Conceptually it it Voice-Over-IP On LTE , but there is a lot more to it than just
                VOIP.
IMS - IMS is IP Multimedia Subsystem. This is a concept for an integrated network.
          This is not a protocol at all.
SIP - Session initiation protocol. This is an application layer protocol. This can establish modify and
         terminate multimedia session.


So in one line VOLTE is an VOIP over LTE which uses SIP protocol over IMS architecture. 

SRVCC Failure

What happens when SRVCC fails at the NW side?
How UE is notified about it and the action it should take?

Notification Procedure (ESM Procedure)
The network can use the notification procedure to inform the UE about events which are relevant for the upper layer which is using an EPS bearer context or has requested a procedure transaction.
If the UE has indicated that it supports the notification procedure, the network may initiate the procedure at any time while a PDN connection exists or a procedure transaction is ongoing.

When the UE receives a NOTIFICATION message, the ESM protocol entity in the UE shall provide the notification indicator to the upper layer.
The notification indicator can have the following value:
#1: SRVCC handover cancelled, IMS session re-establishment required.

The following abnormal case can be identified:
a) Lower layer indication of non-delivered NAS PDU due to handover
If the NOTIFICATION message could not be delivered due to an intra MME handover, then upon successful completion of the intra MME handover the MME shall re-transmit the NOTIFICATION message. If a failure of the handover procedure is reported by the lower layer and the S1 signalling connection exists, the MME shall re-transmit the NOTIFICATION message.