System Information are of Two variant : Static(MIB) and Dynamic (SIB)
MIB: Master Information Block
Logical Chennel: BCCH
Transport Channel: BCH/PBCH
Physical Channel: PBCH
SIB: System Information Block
Logical Chennel: BCCH
Transport Channel: BCH/DL-SCH
Physical Channel: PDSCH
Total 11 SIBS (1,2,3,4,5,6,7,8,9,10,11) are there in LTE according the basic release (Release 8).
There are some more inclusioon of SIB's as per the latest release is as below,
sib12-v920 SystemInformationBlockType12-r9,
sib13-v920 SystemInformationBlockType13-r9,
sib14-v1130 SystemInformationBlockType14-r11,
sib15-v1130 SystemInformationBlockType15-r11,
sib16-v1130 SystemInformationBlockType16-r11,
sib17-v12xy SystemInformationBlockType17-r12
sib18-v12xy SystemInformationBlockType18-r12
|
Type
|
Channel
|
Info
|
Release
|
|
MIB
|
|
PLMN
|
R8
|
|
SIB1
|
|
1.
Cell Access Related Information -
PLMN Identity List, PLMN Identity, TA Code, Cell identity & Cell Status
2.
Cell Selection Information - Minimum
Receiver Level
3.
Scheduling Information - SI message type
& Periodicity, SIB mapping Info, SI Window length
|
R8
|
|
SIB2
|
|
1.
Access
Barring Information - Access Probability factor, Access Class
Baring List, Access Class Baring Time
2.
Semi static Common Channel
Configuration - Random Access Parameter, PRACH Configuration
3.
UL frequency Information - UL
EARFCN, UL Bandwidth, additional emission
|
R8
|
|
SIB3
|
|
1.
Information/Parameters for
intra-frequency cell reselections
|
R8
|
|
SIB4
|
|
1.
Information on intra-frequency
neighboring cells
|
R8
|
|
SIB5
|
|
1.
Information on inter-frequency neighboring
cells
|
R8
|
|
SIB6
|
|
1.
Information for reselection to UMTS
(UTRAN) cells
|
R8
|
|
SIB7
|
|
1.
Information for reselection to GSM
(GERAN) cells
|
R8
|
|
SIB8
|
|
1.
Information for reselection to
CDMA2000 systems
|
R8
|
|
SIB9
|
|
1.
Home eNodeB name – for future LTE
femtocell applications
|
R8
|
|
SIB10
|
|
1.
ETWS (Earthquake and Tsunami Warning System) information Primary
Notification
|
R8
|
|
SIB11
|
|
1.
ETWS (Earthquake and Tsunami Warning System) information Secondary
Notification
|
R8
|
|
SIB12
|
|
1.
Commercial Mobile Alerting System (CMAS) information.
|
R9
|
|
SIB13
|
|
MCCH
Configuration
|
R9
|
|
SIB14
|
|
1.
Extended Access Barring
|
R11
|
|
SIB15
|
|
1.
MBMS SAI (Service Area Identities) Configuration
|
R11
|
|
SIB16
|
|
1.
GPS Related Informatin
|
R11
|
|
SIB17
|
|
|
R12
|
|
SIB18
|
|
1.
Broadcast Information for SL
Communication
|
R12
|
MIB
|
dl_earfcn
|
|
Downlink Earfcn of the CELL
|
pci
|
|
Physical Cell Id
|
Downlink_channel_bandwidth
|
|
System
bandwidth is must for UE in order to decode any other physical layer
channel
e.g. n50
|
antenna_ports_count
|
|
Antenna ports count
|
Phich Configuration
|
Phich Duration
|
Whether it is normal or extended
e.g normal
|
|
Phich Resource
|
Phich Resoursce group for the UE
e.g one sixth
|
System Frame Number
|
|
For initial synchronization and For periodic sync that a UE can do to find
out any drifts of its timing vs the eNb’s timing.
|
SIB1
|
cellAccessRelatedInfo
|
plmn_IdentityList
|
This is the PLMN id of the NW
|
mcc[0]
|
Mobile Country Code
|
mcc[1]
|
mcc[2]
|
mnc[0]
|
Mobile Network Code
|
mnc[1]
|
cellReservedForOperatorUse
|
0 indicates Reserved for Operator
1 Indicates Not Reserved for Operator
|
trackingAreaCode
|
|
Tracking Area Code
|
Cell Identity
|
|
Cell identity helps identify the cell uniquely
within the PLMN
|
Cell Barred
|
|
0 Barred , UE is not allowed to camp
1 Not Barred, UE is allowed to camp
|
intraFreqReselection
|
|
Whether UE is allowed to perform intra
frequency (within band) cell reselection or not
|
csg_Indication
|
|
Closed Subscriber Group Indication
|
cellSelectionInfo
|
q_RxLevMin
|
Minimum required Rx level
|
q_RxLevMinOffset
|
Min required Rx level Off set
|
freqBandIndicator
|
|
Indicates the band number
|
schedulingInfoList
|
si_Periodicity
|
schedulingInfoList indicates sib’s
transmitted by the eNb other than sib1
si_Periodicity indicates the periodicity of that particular si.
|
sib_MappingInfo
|
sib_MappingInfoindicates which sib it is
|
si_WindowLength
|
It’s in millisecond and gives info about specified
window length where it will be transmitted
|
systemInfoValueTag
|
Indicates if there is a change in system
information.
Useful when UE returns from out of coverage
|
.
SIB2
|
AC Baring for Emergency Calls
|
|
|
|
AC Barring for MO Signaling
|
Barring Factor (0 to 0.95, step 0.05
|
|
|
Barring Time (4,8,16, 32,64,128,256,512
Seconds)
|
|
|
Barring For Special AC
|
|
|
AC barring for MO Data
|
Barring Factor (0 to 0.95, step 0.05
|
|
|
Barring Time (4,8,16, 32,64,128,256,512
Seconds)
|
|
|
Barring For Special AC
|
|
|
Radio Resource Configuration
|
RACH Configuration
|
Number of RA Preambles
|
|
Size of RA Preamble Group A
|
|
Message Size Group A
|
|
Message Power Offset Group B
|
|
Power Ramping Step
|
|
Preamble Initial Received Target Power
|
|
Preamble Trans Max
|
|
RA response Window Size
|
|
MAC Contention Resolution Timer
|
|
MAX HARQ Msg3TX
|
|
BCCH Configuration
|
Modification Period Coefficient
|
|
PCCH Configuration
|
Default DRX Cycle
|
|
nB
|
|
PRACH Configuration
|
Root Sequence Index
|
|
PRACH Configuration Index
|
|
High Speed FLAG
|
|
ZERO Co-relation zone Configuration
|
|
PRACH Frequency Offset
|
|
PDSCH Configuration
|
Reference Signal Power
|
|
p-b
|
|
PUSCH Configuration
|
n-SB
|
|
Hopping Mode
|
|
PUSCH Hopping Offset
|
|
Enable 64 QAM
|
|
Uplink Reference Signals
|
Group Hopping Enabled
|
Group Assignment
|
Sequence Hopping Enabled
|
Cyclic Shift
|
PUCCH Configuration
|
Delta PUCCHShift
|
|
nRB CQI
|
|
nCS AN
|
|
nIPUCCH AN
|
|
Uplink Sounding Reference Signal
Configuration
|
setup
|
Bandwidth Configuration
|
|
Subframe Configuration
|
|
Ack/Nack SRS Simul Trans
|
Uplink Power Control
|
pO Nominal PUSCH
|
|
Alpha
|
|
pO Nominal PUCCH
|
|
Delta List
(Power Offset in dB)
|
PUCCH Format 1
(-2,0,2)
|
PUCCH Format 1b
(1,3,5)
|
PUCCH Format 2
(-2,0,1,2)
|
PUCCH Format 2a
(-2,0,2)
|
PUCCH Format 2b
(-2,0,2)
|
Uplink Cyclic Prefix Length
|
|
|
UE Timers and Constants
|
T300 (100,200,300,400,600,1000, 1500,2000
ms)
|
|
T301 (100,200,300,400,600,1000, 1500,2000
ms)
|
|
T310 (0,50,100,200,500,1000, 1500,2000 ms)
|
|
N310 (1,2,3,4,6,8,10,20)
|
|
T311 (1,3,5,10,15,20,30 Seconds)
|
|
N311 (1,2,3,4,6,8,10)
|
|
Frequency Informarion
|
Uplink Carrier Frequency
|
|
|
Uplink Bandwidth
|
|
|
Additional Spectrum Emission
|
|
|
MBSFN Subframe Configuration
(1 to 8 Instances)
|
Radio Frame Allocation Period
|
|
|
Radio Frame Allocation Offset
|
|
|
Subframe Allocation -
One Frame or Four Frames
|
|
|
Time Alignment Timer (Common)
|
|
|
|
SIB18
|
Comm_RX_Pool
|
SL_Comm_Resource_Pool
|
Sc_Period
|
Comm_TX_Pool_Normal_Common
|
Sc_CP_Len
|
Comm_Tx_Pool_Exceptional
|
data_CP_Len
|
|
Sc_TF_ResourceConfig
|
|
dataHoppingConfig
|
|
Ue_SelectedResource_Config
|
|
Tx_Parameters
|
|
Rx_Parameters_N_Cell
|
Comm_Sync_Config_List
|
SL_Sync_Config
|
|
Sources:
http://www.rfwireless-world.com/Terminology/LTE-MIB-SIB-system-information-blocks.html
http://www.etsi.org/deliver/etsi_ts/134100_134199/134108/12.01.00_60/ts_134108v120100p.pdf
