Showing posts with label SIB10. Show all posts
Showing posts with label SIB10. Show all posts

Friday, November 27, 2015

How do UE read ETWS Info in SIB10 SIB11

Below are the steps how do UE read when there is a ETWS notification from NW.

SIB 10 and SIB 11 are  the responsible SIB's for ETWS.
Where SIB10 carry info about primary notification and SIB11 will carry info for secondary notification.



This we can get from below test case according 3GPP spec TS-36.523-1
14.1  ETWS reception in RRC_IDLE state / Duplicate detection
14.2 ETWS reception in RRC_CONNECTED state / Duplicate detection


According the Test Case Below is the steps included for the Test case,

       
St
Procedure
Message Sequence
TP
Verdict


U - S
Message
-
-
1
The SS include an ETWS message with new messageIdentifier and serialNumber in SystemInformationBlockType10 and SystemInformationBlockType11 and transmit a Paging message including etws-Indication on Cell 1 (NOTE1).
<--
Paging
-
-
2
Check: Does the UE indicate the contents of the "warning message" to the user, and alert or activate alerting the user (NOTE2)?
-
-
1
P
3
The SS wait for 10s.
-
-
-
-
4
The SS include an ETWS message with same messageIdentifier and serialNumber in SystemInformationBlockType10 and SystemInformationBlockType11 and transmit a Paging message including etws-Indication on Cell 1 (NOTE1).
<--
Paging
-
-
5
Check: Does the UE indicate the contents of the "warning message" to the user, or alert or activate alerting the user (NOTE2)?
-
-
1
F
NOTE1:     SystemInformationBlockType11 contain 3 segments.
NOTE2:     The data indication and user alerting are the UE implementation issues.





Paging Message for the test case will be as below,

Derivation Path: 36.508 Table 4.6.1-7
Information Element
Value/remark
Comment
Condition
Paging ::= SEQUENCE {



  pagingRecordList
Not present
 Not needed as this is for all the UE

  systemInfoModification
Not present


  etws-Indication
true
 This filed will be true for ETWS notification

  nonCriticalExtension SEQUENCE {}
Not present


}




SIB1 Content will be like below,

Derivation Path: 36.508 table 4.4.3.2-3
Information Element
Value/remark
Comment
Condition
SystemInformationBlockType1 ::= SEQUENCE {



  schedulingInformation ::= SEQUENCE (SIZE (1..maxSI-Message)) OF SEQUENCE {}
Combination 8 in TS 36.508 section 4.4.3.1
SIB2, SIB3, SIB10 and SIB11 are transmitted

}





1. Paging to UE for ETWS (Paging will be there for both Idle and Connected Mode)
2. UE Reads SIB1 , where  "systemInfoValueTag" will be 1 and will contain scheduling info about
3. SIB10 and SIB11.
4. UE reads  other SIB's accordingly
5. User will be notified via alert messages/tones/both as per UE implementation.

Source: 3GPP TS-36.523-1